Sure, here are some things you can do when caulk doesn’t dry:

1. 1. Check the humidity level. Caulk won’t dry properly if the humidity level is too high. If the humidity level is above 50%, consider using a dehumidifier in the area where you’re applying the caulk.

1. 1. Check the temperature. Caulk also won’t dry properly if the temperature is too low. The ideal temperature for applying caulk is between 50 and 90 degrees Fahrenheit. If the temperature is too low, try to use a hair dryer to warm up the area where you’re applying the caulk.

1. 1. Make sure the surface is clean and dry. Caulk won’t adhere properly to a dirty or wet surface. Before applying caulk, make sure to clean the surface with a mild detergent and water, and then let it dry completely.

1. 1. Use a fan to circulate the air. Circulating air can help to speed up the drying process. If you don’t have a fan, you can open a window or door to allow fresh air into the room.

1. 1. Be patient. It can take several hours for caulk to dry completely. If the caulk is still tacky after a few hours, be patient and give it more time to dry.

1. 1. If all else fails, you can remove the caulk and start over. To remove caulk, you can use a caulk remover or a razor blade. Once the caulk has been removed, make sure to clean the surface thoroughly before applying new caulk.

Here are some additional tips for preventing caulk from drying too slowly:

By following these tips, you can help to ensure that your caulk dries properly and quickly.